Electrolux Santo 1573TK-4 Your refrigerator needs air, Detaching the worktop, Special accessories

Installation

Your refrigerator needs air

The refrigerating unit of your refrigerator is designed for maintenance- free operation. What it should never lack is good ventilation. Air is sup- plied under the door through the ventilation slot between the refriger- ator an storage surface. Air is extracted through the upper ventilation grille. Never obstruct these openings by plinth screens or crockery.

If your refrigerator is installed

under a continuous worktop, an air outlet opening of at least 200 cm2

and a ventilation grille (A/B) matching the worktop design

should be provided at the rear of the worktop. The cut surfaces of the worktop (C) should be var-

nished to avoid swelling due to penetration of moisture.

The appliance wall distance must be at least 30 mm and should be

checked before the ventilation grille is inserted.

Special accessories:

A Ventilation grille, brown

B Ventilation grille, white

Detaching the worktop

After the work-top has been removed the appliance can be installed underneatch a continuous work-top.

The procedure is as follows:

0Unscrew the Phillips screws (F) on the right and the left.

0 Lift the work-top slightly, push it about 20 mm towards the rear, and lift it off upwards (G).

Unscrew the holding bracket (H) and keep it in a safe place.

8