Changing the light bulb

Malfunction

 

Possible Cause

 

Remedy

 

 

 

 

 

 

 

 

 

 

Unusual noises.

 

Appliance is not level.

 

Readjust the feet.

 

 

The appliance is touching

 

Move the appliance slightly.

 

 

the wall or other objects.

 

 

 

 

A component, e.g. a pipe,

 

If necessary, carefully bend

 

 

on the rear of the appliance

 

the component out of the

 

 

is touching another part of

 

way.

 

 

the appliance or the wall.

 

 

The compressor does not

 

This is normal, no error has

 

The compressor starts after

start immediately after chan- occurred.

 

a period of time.

ging the temperature set-

 

 

 

 

ting.

 

 

 

 

Water on the floor or on sto-

 

Water drain hole is blocked. See the "Cleaning and

rage shelves.

 

 

 

Care" section.

Changing the light bulb

Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker. Light bulb data: 220-240 V, max. 15 W

1.To switch off the appliance, turn the temperature regulator to posi- tion "0".

2.Unplug the mains plug.

3.To change the light bulb, unscrew the light cover.

4.Unhook the light bulb cover as shown.

5.Change the defective light bulb.

6.Refit the light bulb cover and the screw.

7.Put the refrigerator back into ope- ration.

D411

16

Page 16
Image 16
Electrolux SANTO 2842-4 i installation instructions Changing the light bulb