Electrolux SANTO 2842-4 i Starting up and temperature regulation, Ambient Temperature switch

Models: SANTO 2842-4 i

1 28
Download 28 pages 28.22 Kb
Page 7
Image 7
Starting up and temperature regulation

Starting up and temperature regulation

Please clean the appliance interior and all accessories prior to star- ting the appliance. Plug in the appliance at the mains supply.

¥When the refrigerator compartment door is opened, the internal ligh- ting is switched on. The temperature selector knob is located on the RH side of the refrigerator compartment.

Setting Ò0Ó: Off.

Setting Ò1Ó: Hightest temperature, (warmest setting).

Setting Ò6Ó (end-stop) :Lowest temperature, (coldest setting).

The exact setting should be chosen keeping in mind that the tempe- rature inside the refrigerator depends on:

-the quantity of food stored

-how often the door is opened

The temperatures in the refrigerator compartment and freezer com- partment cannot be independently regulated.

If you want to freeze fresh food rapidly, select setting Ò6Ó, ensuring that the temperature in the refrigerator compartment does not drop below 0¡C. You should also promptly reset the temperature regulator to set- ting Ò3Ó or Ò4Ó.

Important!

High ambient temperatures (e.g. on hot summer days) and a cold set- ting on the temperature regulator (position"5" to "6") can cause the compressor to run continuously.

If this happens, turn the temperature regulator back to a warmer set- ting (position "3" to "4"). At this setting the compressor will be switched on and off as usual and automatic defrosting recommenced.

Ambient Temperature switch

With a room temperature below +16¡C the Fridge free- zer may not function correctly. If the room temperature is lower than +16¡C it will be necessary to depress switch

(A). The relevant pilot light comes on.

B

A

D484

7

Page 7
Image 7
Electrolux SANTO 2842-4 i Starting up and temperature regulation, Ambient Temperature switch, Setting Ò0Ó Off