Electrolux SANTO 2842-4 i installation instructions Energy Saving Tips

Models: SANTO 2842-4 i

1 28
Download 28 pages 28.22 Kb
Page 14
Image 14
Energy Saving Tips

5.Check the water drain hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the drain cleaning tool included with the appliance.

6.After everything is dry place appliance back into service.

Manual backgroundEnergy Saving Tips

¥Do not install the appliance near cookers, radiators or other sources of warmth. High ambient temperatures cause longer, more frequent operation of the compressor.

¥Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent ope- nings.

¥Do not place warm foods into the appliance. Allow warm foods to cool first.

¥Only leave door open as long as necessary.

¥Do not set temperature any colder than necessary.

¥Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Accumulation of dust at the condenser increases energy consump- tion. For this reason carefully clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner. Ensure the appliance is switched off.

14

Page 14
Image 14
Electrolux SANTO 2842-4 i installation instructions Energy Saving Tips