Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use is affected by the ambient temperature. The appliance should therefore
Ðnot be exposed to direct sunlight;
Ðnot be installed next to radiators, cookers or other sources of heat;
Ðonly be installed at a location whose ambient temperature corre- sponds to the climate classification, for which the appliance is desi- gned.
The climate classification can be found on the serial plate, which is located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for each climate classification: each climate classification:
Climate classification |
| for an ambient temperature of |
|
|
|
|
|
|
SN |
| +10 to +32 ¡C |
|
|
|
N |
| +16 to +32 ¡C |
|
|
|
ST |
| +18 to +38 ¡C |
|
|
|
T |
| +18 to +43 ¡C |
|
|
|
Your appliance needs air
For safety reasons, minimum venti- lationmust be as shown Fig.
Attention: keep ventilation ope- nings clear of obstruction;
|
| 2 |
50 mm | min. | 200 cm |
| ||
|
| min. |
|
| cm2 200 |
D567 |
|
|
20
