Reversing the Door
The door hinges can be changed from right (as supplied) to left if required to suit the location where the appliance is installed.
1 Warning! Unplug from the mains before reversing the door.
01. Open the door and remove the plinth cover to the front. Move the door bearing cover on the
plinth cover from the left to the right. Close the door.
2.With the door closed, remove the
3. Remove the door fitting from the
door bearing (1, 2). Move the 1 bearing pivot from the right to
the left hand hole (3). Place the door fitting supplied on the bear- ing pivot (4, 5).
4 | 5 |
2
3 
818 19 | 13 |
