Introduction

This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Model 1285 Jointer. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications

 

Model Number

1285

Stock Number (3HP, 1Ph, 230V, with standard cutterhead)

1791241

Stock Number (3HP, 3Ph, 230V/460V*, with standard cutterhead)

1791249

Stock Number (3HP, 1Ph, 230V, with helical cutterhead)

1791307

Stock Number (3HP, 3Ph, 230V/460V*, with helical cutterhead)

1791308

Cutting Capacity (W x D) (in.)

11-3/4 x 3/4

Cutterhead Speed (RPM)

5,000

Rabbeting Capacity (in.)

3/4

Table Surface (L x W) (in.)

84 x 12

Outfeed Table Height from Floor (in.)

31-5/8

Fence Size (L x W) (in.)

47-1/4 x 5-1/4

Fence Tilt (degrees)

90, 45 right, 45 left

Fence Positive Stops (deg.)

45 and 90

Number of Knives – standard cutterhead

3

Number of Inserts – helical cutterhead

44, with 2 rabbeting

Size of knives – standard cutterhead (L x W x T) (in.)

12 x 13/16 x 1/8

Dust Collection Minimum CFM Required

800

Approximate Net Weight (lbs.)

762

Approximate Shipping Weight (lbs.)

880

*pre-wired 230V

 

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

7

Page 7
Image 7
Powermatic 1285 operating instructions Introduction Specifications, 90, 45 right, 45 left