Electrolux SANTO 3350-7 KA 1

Maintenance and Cleaning

818 19 99-00/7 25

1Warning! Danger of electrical shock! Before replacing the light bulb

switch appliance off and remove the mains plug.

Light bulb specifications: 220-240 V, max. 25W, fitting: E 14

Important!

When replacing the lamp only fit a

lamp of suitable diameter, that is at

least 18 mm, this will ensure a good

seat on the rubber seal.

Where to purchase: specialist

retailer or AEG Service Force Centre.

0 1. To switch the appliance off press the ON/OFF button until the mains

power light extinguishes.

2. Unplug the mains plug.

3. To change the light bulb, undo the

cross head screw and remove the

light bulb cover downwards.

4. Change the defective light bulb.

5. Refit the light bulb cover and the

cross head screw.

Contents

Main Dear customer, 1 3 2 Contents Page 1Important Safety Instructions Page Environmental Information Packaging Old Appliances Appliance Transport Before Use 3 Packaging Page Installation Installation Location The Refrigerator needs Ventilation Appliance Alignment Electrical Connection 1 Reversing the Door 1 Page Description of the Appliance Control Panel Buttons for Adjusting the Temperature Temperature Display Prior to Initial StartUp 1 Initial Start-Up 3 Temperature Adjustment 3 FAST CHILL Switching the Appliance off Opening the Door Interior Fittings Storage Shelves Salad Bin 3 Page Proper Storage Hints and Tips Normal Operating Sounds Food Storage 2 Defrosting The Fridge defrosts automatically Maintenance and Cleaning Internal Cleaning 1 1 26 Something Not Working Before contacting your local Service Force Centre, check the following points. Regulations, Standards, Guidelines ; Technical Terminologyy Guarantee Conditions European Guarantee Page Service & Spare Parts