Electrolux SANTO 3778-8 KA Prior to Initial Start-Up, Temperature Display, Fast Chill button

Temperature Display

The temperature display can indicate several pieces of information.

•During normal operation, the temperature currently present in the refrigerator (ACTUAL temperature) is displayed.

•When the temperature is being adjusted a flashing display indicates the fridge compartment temperature currently set (DESIRED temper- ature).

FAST CHILL button

The FAST CHILL function is suited for quick cooling of large quantities of goods in the refrigerator, e.g. drinks and salads for a party.

01. The FAST CHILL function is switched on by pressing the FAST CHILL but- ton. The yellow light illuminates.

The FAST CHILL function now provides for intensive cooling. A DESIRED temperature of +2 °C is automatically selected. The FAST CHILL function is ended automatically after a period of 6 hours. The originally selected DESIRED temperature is again valid. The temperature display shows the ACTUAL refrigerator temperature.

2.The FAST CHILL function can be ended manually at any time by pressing the FAST CHILL button again. The yellow light goes out.

Prior to Initial Start–Up

1 Before connecting the appliance to the mains and putting it into operation for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is necessary to allow the refrigerant to flow back into the compressor. Otherwise the compressor may be damaged.

01. Please clean the appliance interior and all accessories prior to initial start-up (see section: “Maintenance and Cleaning”).

818 22 49-00/6 17