4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE: ONLY

LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED

TO RESET VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE.

Fig.4

Check for gas soundness after connecting the gas supply.

250 The gas bayonet connector must be fitted in the shaded area indicated in Fig.

4.Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

650

400

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

5. FITTING THE BATTERY

1. The battery is located on the left hand side of the front

plinth.

Fig 5.

2. To gain access to the battery, open the main oven door and lift up the battery holder lid.

3. Fit the new battery ensuring (+) terminal is next to the

(+) sign on the battery. See Fig.5. 4. Close the lid of the battery holder

6. PRESSURE TESTING

1.The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector. whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.Gas The pressure must be set to 28 mbar for use on butane or 37

mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap full on and pressing the ignition button on the fascia panel. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pressing the ignition button. As soon as the burners are lit the button can be released.

43

Page 42 Page 44
Page 43
Image 43
Electrolux SIG 340 Connecting to GAS, Fitting the Battery, Pressure Testing, Checking the Grill, Checking the Hotplate
Page 42 Page 44

SIG 340 specifications

The Electrolux SIG 340 is a sophisticated kitchen appliance designed with efficiency and versatility in mind. As part of Electrolux's commitment to providing high-quality home solutions, the SIG 340 embodies innovation and a user-friendly experience.

One of the standout features of the Electrolux SIG 340 is its advanced cooking technology. This appliance incorporates induction cooking surfaces, which offer rapid heating and precise temperature control. Induction cooking is not only energy-efficient but also ensures faster cooking times compared to traditional gas or electric cooktops. The smooth surface of the induction cooktop is easy to clean and contributes to a sleek aesthetic that fits seamlessly in any kitchen environment.

The SIG 340 comes equipped with multiple cooking zones, allowing users to prepare various dishes simultaneously. Each zone features adjustable power settings, providing flexibility whether you're simmering a sauce or searing meat. The inclusion of a versatile cooking timer enhances the appliance's functionality, ensuring that meals are cooked to perfection without overcooking or undercooking.

Energy efficiency is another hallmark of the Electrolux SIG 340. This appliance is designed to minimize energy consumption while delivering optimal performance, making it an eco-friendly choice for modern homes. Smart technology integrated into the SIG 340 helps monitor and adjust energy use, promoting sustainable cooking habits.

Safety is also a top priority in the design of the SIG 340. The appliance includes features such as a child lock, automatic shut-off, and overheat protection, ensuring peace of mind while preparing meals. The intuitive user interface is designed for ease of use, with clear displays and touch controls that make selecting cooking modes and settings straightforward.

Overall, the Electrolux SIG 340 represents a blend of cutting-edge technology, safety, and user-centered design. With its sleek induction cooktop, multiple cooking zones, and energy-efficient features, it caters to the needs of modern cooks who value both performance and sustainability in their kitchen appliances. Whether you are an amateur home chef or a seasoned culinary expert, the SIG 340 is equipped to enhance your cooking experience and inspire culinary creativity.
Top Page Image Contents