4. CONNECTING TO GAS

This appliance is designed to be installed with an appliance flexible connection only. Supply piping should not be less that R³/8. Connection is made to the Rc ½ (½" B.S.P.) female threaded entry pipe located just below the hotplate level on the rear left hand side of the appliance. NOTE:

ONLY LIQUID SEALANTS TO BE USED WHEN INLET GAS PIPE IS FITTED TO SHUT OFF VALVE I.E.: DO NOT USE P.T.F.E. SEALANT TAPE. Check for gas soundness after connecting to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated in Fig.3. Take into account that it must be possible to pull the appliance forward sufficiently. The hose must not get caught on the stability bracket.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS. 669 CURRENT EDITION.

50 100

850

Fig.3

700

L.P.G. FLEXIBLE CONNECTIONS MUST BE OF A TYPE SUITABLE FOR L.P.G. AND CAPABLE OF OPERATION UP TO 50 mbar AND TO CARRY A RED STRIPE, BAND OR LABEL.

250

450

All dimensions in

mm

5. CONNECTION TO THE ELECTRICITY SUPPLY

WARNING: THIS APPLIANCE MUST BE EARTHED. DO NOT EARTH THIS APPLIANCE TO THE GAS SUPPLY PIPING.

This appliance must be connected to 230V-240V A.C. Fig.4 50Hz supply. It is supplied with 2 metres of 5 amp 3

core cable incorporating a moulded 13 amp plug , fitted with a 3 amp fuse, which can be plugged directly into the nearest suitable socket. Ensure the plug is accessible to the user. If this is not long enough, the supply cable can be replaced totally by a longer cable at least 0.75mm² nominal cross sectional area (24/0.2mm).

IF THE MOULDED PLUG IS CUT FROM THE CABLE

FOR ANY REASON, IT MUST BE DESTROYED OR

DISPOSED OF SAFELY, AS THE PROTRUDING

WIRES WILL BE AN ELECTRIC SHOCK HAZARD.

If any other type of plug is used it should incorporate a 3 amp fuse in either the plug or adapter or at the distribution board.

If the cable has to be threaded through small apertures in cabinets etc., it may be disconnected from the appliance, then re-connected to as shown in Fig.4.

DO NOT EXTEND THE CABLE USING PLASTIC OR CERAMIC CONNECTION TERMINAL BLOCKS AND/OR INSULATION TAPE.

ALL EXTERNAL WIRING BETWEEN THE APPLIANCE AND THE ELECTRICAL SUPPLY SHALL COMPLY WITH I.E.E. WIRING REGULATIONS.

43

Page 43
Image 43
Electrolux SIG 501 installation instructions Connecting to GAS, Connection to the Electricity Supply

SIG 501 specifications

The Electrolux SIG 501 is a versatile and innovative kitchen appliance designed to enhance the cooking experience while ensuring optimal performance and efficiency. This built-in oven is a perfect blend of modern technology and user-friendly features, making it a favorite choice for both amateur cooks and gourmet chefs alike.

One of the standout features of the Electrolux SIG 501 is its advanced cooking modes. With multiple settings, including traditional baking, broiling, and convection, this oven allows users to achieve professional-level results. The convection cooking technology circulates hot air evenly throughout the oven, ensuring that dishes are cooked consistently and thoroughly.

Another remarkable characteristic of the SIG 501 is its intuitive touch control panel. The easy-to-navigate interface simplifies operations, enabling users to select cooking modes, set timers, and adjust temperatures with just a few taps. This modern touchscreen control is complemented by a sleek, minimalist design that seamlessly fits into any contemporary kitchen.

The Electrolux SIG 501 also prioritizes energy efficiency. With its A+ energy rating, it consumes less energy while still delivering powerful performance. This is an essential feature for environmentally-conscious consumers looking to minimize their carbon footprint without compromising on quality.

Safety is another important aspect of the SIG 501. The oven is equipped with features such as a child safety lock and a cooling fan that keeps the exterior temperature at a safe level, preventing burns or accidents during cooking. These safety mechanisms make it a worry-free choice for families with young children.

Additionally, the SIG 501 boasts a spacious interior with multiple rack positions, allowing users to cook multiple dishes at once. Its easy-to-clean enamel interior is resistant to stains and built-up grease, ensuring that maintenance is a breeze after preparing meals.

In summary, the Electrolux SIG 501 combines cutting-edge technologies, user-friendly features, and safety considerations to create a top-tier cooking appliance. Its advanced cooking modes, energy efficiency, and robust safety features make it an excellent addition to any kitchen, catering to both casual cooks and culinary enthusiasts who value quality and performance.