Pressure Testing, Checking the Grill | Electrolux SIG 501 guide

Fig.4a

If the wiring is extended or a completely new cable fitted a 3-pin 13 amp plug should be fitted. (See Fig.4a). Connect the wires as follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or

by the earth symbol or coloured GREEN or GREEN and

YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket. Plug in the appliance.

6. PRESSURE TESTING

1 The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane. Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the

F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the

ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

SIG 501 specifications

The Electrolux SIG 501 is a versatile and innovative kitchen appliance designed to enhance the cooking experience while ensuring optimal performance and efficiency. This built-in oven is a perfect blend of modern technology and user-friendly features, making it a favorite choice for both amateur cooks and gourmet chefs alike.

One of the standout features of the Electrolux SIG 501 is its advanced cooking modes. With multiple settings, including traditional baking, broiling, and convection, this oven allows users to achieve professional-level results. The convection cooking technology circulates hot air evenly throughout the oven, ensuring that dishes are cooked consistently and thoroughly.

Another remarkable characteristic of the SIG 501 is its intuitive touch control panel. The easy-to-navigate interface simplifies operations, enabling users to select cooking modes, set timers, and adjust temperatures with just a few taps. This modern touchscreen control is complemented by a sleek, minimalist design that seamlessly fits into any contemporary kitchen.

The Electrolux SIG 501 also prioritizes energy efficiency. With its A+ energy rating, it consumes less energy while still delivering powerful performance. This is an essential feature for environmentally-conscious consumers looking to minimize their carbon footprint without compromising on quality.

Safety is another important aspect of the SIG 501. The oven is equipped with features such as a child safety lock and a cooling fan that keeps the exterior temperature at a safe level, preventing burns or accidents during cooking. These safety mechanisms make it a worry-free choice for families with young children.

Additionally, the SIG 501 boasts a spacious interior with multiple rack positions, allowing users to cook multiple dishes at once. Its easy-to-clean enamel interior is resistant to stains and built-up grease, ensuring that maintenance is a breeze after preparing meals.

In summary, the Electrolux SIG 501 combines cutting-edge technologies, user-friendly features, and safety considerations to create a top-tier cooking appliance. Its advanced cooking modes, energy efficiency, and robust safety features make it an excellent addition to any kitchen, catering to both casual cooks and culinary enthusiasts who value quality and performance.

Electrolux SIG 501 Pressure Testing, Checking the Grill, Checking the Hotplate

Models: SIG 501