Programming options
Objective Implementation
Permanently programme
in the audible
signal which reminds
you that the programme
is complete.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL button and hold down for
approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
Adjust ’level of dryness’
detection:
If the laundry is slightly
drier or slightly damper
at the end of the
programme than with
the standard setting.
1. Turn the programme selector to any programme.
2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the
same time and hold down for approx. 5 seconds. The cur-
rent setting is displayed on the programme progress dis-
play:
– END display: Setting for drier laundry
– COOLING display: Standard setting
– DRYING display: Setting for damper laundry
3. Press the START/PAUSE button until the setting required
appears on the programme progress display.
4. Turn the programme selector to OFF.
The setting is permanently programmed.
To deactivate the EMPTY
WATER display when
using an external drain
for the condensed water.
1. Turn the programme selector to any programme.
2. Press the DELAY TIMER and SPECIAL CARE buttons at the
same time and hold down for approx. 5 seconds. The EMPTY
WATER display flashes briefly.
The EMPTY WATER display is permanently deactivated.
Settings may be cancelled as under 1 and 2, but the EMPTY
WATER display is briefly illuminated (instead of flashing).
24
125983990.qxp 2006-04-21 07:12 Page 24