1.Door Latch (push the knob to the right to open)
Avoid opening the door while a program is in progress.
2.Space for programme chart
3.Control panel with indicator lights
• Lights
A.Indicates the dryer is running
B.Indicates that the water tank is full
• On/off timer knob
C.Turn this knob in a clockwise direction to start the dryer and set both the drying time and the drying temperature.
High heat: The timer indicates up to 120 mins for cotton/linen.
Low heat: The time indicates up to 80 mins for synthetics.
The last 8 - 12 minutes of each drying cycle is a cool down phase.
4.Warm air discharge
5.Adjustable feet
If the dryer is not being wall mounted the feet need to be adjusted so that the dryer is level.
6.Air ducts - These should not be obstructed.
7.Filters
Should be cleaned before or after each load. The fluff filter is behind the coarse filter and can be removed for cleaning.
8.Condenser
This is built into the door and needs to be cleaned at regular intervals.
9.Water tank
This fills up with the water condensed by the dryer, and should be emptied before or after each load. When the tank is full, warning light (B) will come on and the dryer will stop automatically. It cannot be restarted until the tank has been emptied.
10.Drum
11.Rating plate
12.Electrical supply cable
13.Holder for wall mounting console
3
A 
B
C
- 5 -
