Kenmore 790.4803 manual Setting Oven Controls, Setting Continuous Bake or 12 Hour Energy Saving

Setting	the Oven Controls
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER _	and FLEX CLEAN @ pads control the Continuous Bake or 12 Hour Energy Saving features. The oven

control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS

PR ESS

DISPLAY

Energy

Saving

features

To set the control for ContinuOUSor Bake or 12beepsHOUronce

for

7

1.

Press and hold _

for 7 seconds

until the control

_

(Fig. 1). "12h" or_-_=h"% will appear in the display and the control

_seconds

Fig. 1

2.

will beep once.

@

Press @

to switch between the 12 Hour Energy Saving and

continuous

bake features. Note: "12h"

(Fig. 2) in the display

Fig. 2

indicates the control is set for the 12 Hour Energy Saving mode

andBake"=feature(Fig.3).=h"indicates

the control

is set for the Continuous

3.

Press

(_

to

accept the

change

(Fig. 4; display will return to

(_

Fig. 3

time of day) or press _

to reject

the change,

or _

Fig. 4

Setting

Timer

The TIMER _

pad

controls

the Timer

feature. The Timer serves

as an extra

timer

in the kitchen

that will beep when

the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.

	iNSTRUCTiONS	PRESS	DISPLAY
To set the Kitchen Timer (example for 5 minutes)		@
1. Press	(Fig. 5).

2.Press the number pads to set the desired time in the display

(example (_).		Press _.	The time will begin a count	Q@	Fig. 5
down	(Fig. 6).
Note: If ____ARTiS_not pressed the timer will return to the time of
day after 25 seconds.
3. When	the set time has run out, the clock will sound with 3 long				Fig. 6
beeps	every	5 seconds until _	is pressed (Fig. 7).
To cancel the Timer before the set time has run out
Press _.	The	display will return	to the time of day.		Fig. 7
",¢z_ZC>"

To Set Add 1 Minute Feature

The @ ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the @ pad is pressed,

added to the Timer feature if this feature is already active. If the Timer feature is not active and the _ the Timer feature will become active and will begin counting down from 1 minute. For further information the Timer feature see Setting Timer instructions above.

1 minute is

pad is pressed, on how to set