Electrolux TINSEB471MRR0 Do not remove the Waveguide Cover

Unpacking & Installation Instruction

Unpacking and examing your oven

1.Remove all packing materials from inside the oven cavity. Do not remove the Waveguide Cover, which is located on the right cavity wall. Read and SAVE this Use and Care Guide.

2.Remove the feature sticker, if there is one, from the outside of the door.

Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact your dealer or

ELECTROLUX AUTHORIZED SERVICER.

Choosing a location for your oven

You will use your oven frequently, so plan its location for ease of use. The oven must be placed on a countertop which is a minimum of 36 inches from the floor. Allow at least 2 inches on the sides, top and at the rear of the oven for air circulation.

Your oven can be built into a cabinet or wall by itself or above any electric wall oven or warming drawer.