Emptying and Cleaning the Dust Collector
1. Press the button on the | 2. ... | lift off the lid. | 3. Take out the dust collector. | 4. Remove the grille with the |
rear side of Trilobite, and ... |
|
|
| opening facing up. |
5.Empty the collector (preferably in a plastic bag fit snugly around the unit).
Do not knock the collector against hard surfaces to empty it. Always replace with
a new filter.
Cleaning the Roller
1.Check the roller each time the dust collector is emptied. Begin by lifting Trilobite by the handle.
2.Turn Trilobite upside down and put it on a soft surface with the display facing you.
3. Push the locking knob to | 4. Raise the cover. | 5. Lift the roller by the end |
the right. |
| without a drive belt. |
|
| Remove it by holding it |
|
| at an angle and pulling |
|
| upwards/outwards. |
14 English
