Electrolux ZKS5653 First use, Set the water softener

First use

Before using your dishwasher for the first time:

• Ensure that the electrical and water connec-

tions comply with the installation instructions

• Remove all packaging from inside the appli-

ance

• Set the water softener

• Pour 1 litre of water inside the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

there is no need to fill up with rinse aid

– set the water softener

– add special (dishwasher) salt

there is no need to fill up with special salt or

rinse aid.

Check whether these detergents are suitable

for your water hardness. Follow the manufac-

turers instructions.

– Set the water hardness to level 1.

IMPORTANT!

If the drying results are not satisfactory we rec-

ommend that you:

1. Fill up the rinse aid dispenser with rinse aid.

2. Set the rinse aid dosage to position 2.

If you decide in future to use separated deter-

gents, we advise that you:

– Fill up the salt and rinse aid container.

– Adjust the water hardness setting to the

highest level and perform 1 normal washing

programme without loading any dishes.

– Adjust the water hardness setting according

to the hardness of the water in your area.

– Adjust the rinse aid dosage

Set the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and salts

from the water supply, which would have a det-

rimental or adverse effect on the operation of

the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water hardness