![](/images/new-backgrounds/1223573/22357325x1.webp)
Using the remote control – Remote control instructions
REMOTE CONTROL INSTRUCTIONS
< Inserting the batteries into the remote control >
1.Push the back of the remote control.
2.Pull forward slightly.
3.Insert two AAA 1.5V batteries.
4.Ensure the correct polarity
5.Close the lid.
CAUTION: Use only Alkaline Batteries.
zIf the remote control is not working, see the checkpoints below.
zAre the polarities of the batteries (+,
zAre the batteries worn out?
zIs there an AC power failure?
zIs the power cable plugged in?
zIs any special fluorescent or neon sign board turned on?
<Remote Control Reception Angle>
Use the Remote control within a range of 7~10m and at an angle of 30° to either side of the receiver.
CAUTION
zUsed batteries should be recycled.
zKept out of children's reach.
zDo NOT use new and old batteries together.
zChange both batteries at the same time.
zWhen not using the remote control over a long time, remove the batteries from the unit.
zUse only Alkaline battery.
12