Battery Installation
1.Pull the battery drawer out carefully.
2.Place the Lithium battery, see Fig. 1 for correct polarity.
3.Close the battery drawer.
!CAUTION:
•Ensure correct polarity / minus pole on top.
•Use only the Lithium Battery CR2430 3.0 V 19372.
•Remove battery if the
•Never
•Avoid direct sunlight or temperatures above 45°C. The battery may explode!
Hot-Shoe Connector with Screw-Lock
The new
to fit digital and analogue cameras with maximum sync output of 3 V (the middle contact is the positive pole).
Operating Instructions
Fig. 1 | Battery (19372) | |
Minus pole on top | ||
|
Flexible swivel
Antenna 360 ̊
Battery drawer
3