Elinchrom 19350 manual Power save mode timer, Status LED, Reset to manufacturer default setting

Power save mode timer:

-After not using the Transmitter for 30 minutes the Power Save mode is active. To reactivate the Transmitter, press the TEST push button.

-The Power Save mode timer can be configured with the EL-Skyport PC / MAC software v 3.0 and higher.

Status LED:

-LED flashes every 4 seconds one time in “Standard” mode and two times in “Speed” mode.

-LED intensity correspond to the battery status - if off or very low => exchange the battery.

-LED is OFF if the Transmitter is switched OFF or in Power Save mode.

Reset to manufacturer default setting:

-Switch ON.

-Press test button for min 10 seconds.

7