Elinchrom 19350 manual EL-SkyportSync Speed & Standard Mode, Select “Speed” sync mode

EL-Skyport Sync Speed & Standard Mode

The SPEED function is available for Ranger Quadra AS, BXRi 250 / 500 und D-Lite it and all other units, when used with the EL-Skyport Universal Speed.

Select “Speed” sync mode

Synchronises SLR cameras up to 1/250 s, or compact digital cameras up to 1/2850 s, depending on the camera type & the flash duration of the flash unit.

-Select “Group” or “All” mode.

-Press test push button for minimum 5 seconds until the STATUS LED flashes two times.

-Release test push button.

-Now the EL-Skyport Transmitter Speed works in “SPEED” mode (r.2 mode).

Select “Standard” triggering mode

Synchronises SLR cameras up to 1/200 s, or compact digital cameras up to 1/1600 s, depending on the camera type & the flash duration of the flash unit.

-Select “Group” or “All” mode.

-Press test push button for minimum 5 seconds until the STATUS LED flashes one time.

-Release test push button.

-Now the EL-Skyport Transmitter Speed works in “STANDARD” mode.

EL-Skyport Module Configuration:

Only possible with EL-Skyport PC / MAC software v 3.0 and higher.

-Power-Save Timer, individual programmable or disabled.

-Trigger delay is programmable from 250 ms up to 15 s.

-Download the FREE EL-Skyport Software from www.elinchrom.com

SET Config Mode: (to configure included features)

-Switch module OFF.

-Hold test push button and switch TX ON.

-Keep test push button pressed until STATUS LED is ON.

Check also EL-Skyport PC / MAC software 3.0 for changing Transmitter Speed setting.

5