Installation
1.Use a spray bottle filled with water and a mild detergent (1:1000 ratio column).
2.Thoroughly clean the glass surface using the correct glass‐cleaning equipment.
3.Make sure that the glass surface is smooth (unblemished) and perfectly flat.
4.Cut the screen to fit the required size of the product.
5.Partially separate the film from the screen’s adhesive backing.
(*Manufacturer’s Tip: It is easier to apply the screen while separating the film from the adhesive simultaneously. This keeps the material from sticking together or going on the surface unevenly.
6.Spray applicators are ideal to evenly spread the moisture before attaching the screen material to the glass.
3
Rev.022111‐AS | info@elitescreens.com |
www.elitescreens.com |
