ECU8*1A, ECU8*2A, ECU8*3A

Installation Instructions

Refrigeration Packages

INSTALLATION

1.Insure proper ventilation. In fully recessed drinking fountains be sure condenser faces louver panel and is within 1/2" (13 mm) of louver panel when panel is in place.

2.Water inlet is 3/8" (10 mm) O.D. tube connector. Contractor to supply connections as required.

3.Connecting lines to be made of copper. Thoroughly flush all lines to remove all foreign matter before connecting to cooler.

4.Connect cooler to building supply with a shut-off valve and install a 3/8" (10 mm) water line between the valve and cooler. Remove burrs from outside of water line. Insert water line into bulkhead union until it reaches a positive stop, approximately 3/4" (19 mm).

5.Electrical: Make sure power supply is identical in voltage, cycle, and phase to that specified on cooler serial plate. Never wire the compressor directly to the power supply.

IMPORTANT! INSTALLER PLEASE NOTE:

The grounding of electrical equipment such as telephone, computers, etc., to water lines is a common procedure. This grounding may be in the building, or may occur away from the building. This grounding can cause electrical feedback into a water chiller, creating an electrolysis which causes a metallic taste or an increase in the metal content of the water. This condition is avoidable by using the proper materials indicated below. Drain fittings which are provided by the installer should be plastic to electrically isolate the chiller from the building plumbing system.

START-UP

1.Open supply line valve.

2.Purge all air from all water lines by operating bubbler valve of fountain to which cooler is connected. A steady stream flow assures that all air is removed.

3.Rotate fan blade to assure proper clearance and free action.

4.Connect to proper electrical power.

TROUBLE SHOOTING & MAINTENANCE

Temperature Control: Factory-set for 50°F water (± 5°) under normal conditions. For colder water, adjust screw on item no. 5.

Ventilation: Cabinet louvers and condenser fins should be periodically cleaned with a brush, air hose, or vacuum cleaner. Excess dirt or poor ventilation can cause no cold water and compressor cycling on the overload protector.

Lubrication: Motors are lifetime lubricated.

Actuation of Quick Connect Water Fittings: Cooler is provided with lead-free connectors which utilize an o-ring seal. To remove tubing from the fittings, relieve water pressure, push in on gray collar while pulling on the tubing. To insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4”.

WIRING DIAGRAM

 

 

 

 

OPERATION OF QUICK CONNECT FITTINGS

 

SIMPLY PUSH IN

TUBE IS SECURED

PUSH IN COLLET

 

TUBE TO ATTACH

IN POSITION

TO RELEASE TUBE

 

 

 

PUSHING TUBE IN BEFORE

 

 

 

PULLING IT OUT HELPS TO

 

 

 

RELEASE TUBE

 

 

 

 

97381C (Rev. A - 12/98)

Page 1
Image 1
Elkay ECU8*1A installation instructions Installation, IMPORTANT! Installer Please Note, Start-Up

ECU8*1A specifications

The Elkay ECU8*1A is an innovative water cooler and hydration station designed to meet modern hydration needs in various settings, including schools, offices, and recreational facilities. With its sleek, stainless steel construction, the ECU8*1A is not only aesthetically pleasing but also highly durable, making it a reliable choice for high-traffic areas.

One of the standout features of the Elkay ECU8*1A is its advanced water filtration system. This built-in filtration technology ensures that the water dispensed is free from contaminants, providing users with clean and safe drinking water. The filtration system is designed to reduce chlorine taste, odor, and sediment, enhancing the overall quality of the water.

The ECU8*1A is equipped with an electric cooling unit that efficiently cools water to a refreshing temperature. It has a high-capacity cooling system capable of delivering up to 8 gallons of chilled water per hour, making it suitable for large groups of users. This feature is particularly beneficial in busy environments where hydration needs to be met quickly and effectively.

Another notable characteristic of the Elkay ECU8*1A is its user-friendly design. The unit features an ergonomic push-button activation that allows for effortless operation. Additionally, the unit includes a convenient bottle filler for those looking to refill reusable water bottles, promoting sustainability and reducing the use of single-use plastic bottles.

The Elkay ECU8*1A also supports technological advancements with its integrated sensor that counts the number of bottle fill-ups, providing facilities with valuable data on hydration usage. This feature encourages water consumption and promotes healthy habits among users.

Moreover, the unit is compliant with ADA standards, ensuring accessibility for individuals with disabilities. Its thoughtful design accommodates users of all ages and abilities, demonstrating Elkay’s commitment to inclusivity.

In terms of installation, the ECU8*1A is designed for easy integration into various environments. It can be wall-mounted, making it a space-efficient option for locations with limited space. The product is also backed by Elkay's reputation for quality, ensuring that users receive a reliable product with excellent customer support.

Overall, the Elkay ECU8*1A is a high-performing, efficient, and user-friendly water cooler and hydration station, making it an ideal choice for those looking to promote health and wellness through accessible hydration solutions. With its combination of advanced features, sustainability, and durability, it stands out as a modern solution for meeting hydration needs in any environment.