3200L | 4200L / 4600L / 5500L |
Touchmonitor Connections
1.Connect the HDMI and/or VGA video cables between the monitor’s HDMI/VGA input connectors and your HDMI/VGA video source, respectively. Tighten the VGA cable’s screws for best EMI performance and strain relief.
2.Connect the USB touch cable between the monitor’s USB connector and the PC’s USB port.
3.Connect the audio cable between the monitor’s Audio In jack and your audio source.
4.Select the correct power cable for your region. Connect it between the AC power source and the touchmonitor’s POWER IN connector.
5.Replace the cable cover, if desired.
6.The touchmonitor ships in an OFF state. Press the power button to turn it on.
User Manual– Interactive Digital Signage
SW601176 Rev F, Page 8 of 40
