Elo TouchSystems 5500L, 4600L, 4200L, 3200L user manual Safety & Maintenance, Chapter

Chapter 8

Safety & Maintenance

Safety

To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor or Computer Module. They are not user-serviceable.

The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block or insert anything inside the ventilation slots.

The touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug only fits into a grounded outlet. Do not fit or modify the plug into an outlet that has not been configured for this purpose. Do not use a damaged power cord. Only use the power cord that came with your Elo Touch Solutions touchmonitor. Use of an unauthorized power cord might invalidate your warranty.

Ensure that your installation is equipped to maintain the specified environmental conditions listed in the unit’s specifications on the Elo Touch Solutions website www.elotouch.com.

Environmental conditions for transportation and storage

Temperature:
Operating	0°C to 35°C
Storage/Transportation	-20°C to 60°C
Humidity (non-condensing) :
Operating	20% to 80%
Storage/Transportation	10% to 90%
Altitude:
Operating	0 to 3,000m
Storage/Transportation	0 to 12,192m

Caution

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

User Manual– Interactive Digital Signage

SW601176 Rev F, Page 29 of 40