26User’s Guide
OSD Function Description (Under Analog Display)
Ite m | Function De s cription |
|
|
Brightness | To increase or decrease the brightness. |
|
|
Contrast | To increase or decrease the contrast. |
|
|
Frequency | To adjust frequency (dot clock). |
|
|
Phase | To adjust phase (clock- phase). |
|
|
Horizontal | To move the screen left or right. |
|
|
Vertical | To move the screen upward or downward. |
|
|
OSD Hor Pos | To move OSD menu left or right. |
|
|
OSD Ver Pos | To move OSD menu upward or downward. |
|
|
OSD Background | Choose between Opaque or Translucent. |
|
|
User Timeout | Set OSD screen appearing time. |
|
|
Color Temp | Choose between Defuault, System 1, System 2, System 3 or |
| System 4 color temp. |
|
|
Red | Balance Red. |
|
|
Green | Balance Green. |
|
|
Blue | Balance Blue. |
|
|
DPMS | Enable or Disable DPMS. |
|
|
Auto Source | Enable or disable auto source selection |
Select |
|
|
|
Freeze Frame | Enable or Disable freeze frame |
|
|
Zoom | Enable zoom- in function |
|
|
Scale Mode | Choose scale mode between fill screen, aspect ratio, or one |
| to one |
|
|
Input Source | Choose input source between analog RGB, digital RGB, |
Select | composite video, or super video |
|
|
Auto Adjust | The Auto- Adjust will automatically adjust V- Position, H- |
| Position, Clock, |
| Clock- Phase, and Contrast, the whole process takes about 5 |
| seconds. (Please use the test pattern file in the attached LCD |
| monitor utility disk for Auto Adjust). |
|
|
Recall Factory | Set to factory default. |
Default |
|
|
|
Infomation | Display information on resolution, refresh rate, and input |
| mode. |
|
|
