Elo TouchSystems AMM19TK2, AMM18TK2, AMM17TK2, AMM170TK2 manual Quick Start

AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2(HB) 43

Tounchscreen User's Manual (AMM170TK2-TE/AMM17TK2-TE/ AMM18TK2-TE/AMM19TK2-TE/AMM19TK2(HB)-TE or AMM170TK2-TEW/AMM17TK2-TEW/AMM18TK-TEW/AMM19TK2- TEW/AMM19TK2(HB)-TEW)

Quick Start

1.Connect Power Code and VGA Cable of LCD Monitor. 2.Connect Touchscreen DB9 male RS-232 cable. 3.Turn the LCD display Power ON.

4.Adjust the tilt of LCD Monitor. 5.Adjust the Picture of LCD Monitor.

6.Install driver software of Touchscreen (See "Driver software" for details).

7.Adjust the calibration of Touchscreen (See "Driver software" for details).

Introduction

The ELO IntelliTouch Touchscreen system consists of a touchscreen and an electronic touchscreen controller. The touchscreen may be a flat, spherical, or cylindrical and is installed over the face of the LCD. The touchscreen controller installed inside of theLCD.

The IntelliTouch Touchscreen

The IntelliTouch surface wave touchscreen consists of a glass panel molded to the precise shape of a display's face. A scratch-resistant, hard-coated plastic cover

sheet may be clear for best image clarity or have an antiglare finish.

The IntelliTouch Controller

The IntelliTouch controllers provide the drive signal for touchscreen, convert the received analogue signals into digital touch coordinates, and send these

coordinates to the computer.