Elo TouchSystems ET1745C, ET1545C Installing the USB Touch Driver for Windows 2000 and Windows

Chapter 2 : Installation and Setup

2.Click the Browse button to locate the EloCd.exe program on the CD-ROM.

3.Click Open, then OK to run EloCd.exe.

4.Follow the directions on the screen to complete the driver setup for your version of Windows.

Installing the USB Touch Driver for Windows 2000 and Windows 98

1.Insert the Elo CD-ROM in your computer’s CD-ROM drive.

If Windows 98 or Windows 2000 starts the Add New Hardware Wizard:

2.Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.

3.When a list of search locations is displayed, place a checkmark on “Specify a location” and use Browse to select the \EloUSB directory on the Elo CD-ROM.

4.Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next again.

5.You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.

If Windows 98 or Windows 2000 does not start the Add New Hardware Wizard:

Note: For Windows 2000 you must have administrator access rights to install the driver.

1.Insert the Elo CD-ROM in your computer’s CD-ROM drive.

If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program.

2.Follow the directions on the screen to complete the driver setup for your version of Windows.

If the AutoStart feature is not active:

1. Click Start > Run.

12 - Elo Entuitive Touchmonitor CRT Rear Mount User Guide