2-8 Elo Entuitive Touchmonitor User Guide
4Power on your monitor using the Soft power switch and check that the power
LED is on, then power on your PC. If not, repeat steps 2, 3, and 4, or refer to
Chapter 4, Troubleshooting.
5After a brief pause the picture should appear. If necessary, adjust the front
panel controls according to your personal preference (see Chapter 3).
6Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to
install the appropriate touchscreen driver softwa re. Follow the directions
starting on the next page to install the driver software.
Soft Power Switch
Power LED