Elo TouchSystems touch monitor manual Touchmonitor Safety

A P P E N D I X

B

TOUCHMONITOR SAFETY

DANGER As this equipment is received it presents an electrical shock hazard that could result in serious injury or death. Only qualified persons should work around this equipment when it is energized. This equipment is intended to be used by a manufacturer only for building-in to other equipment which will provide a proper electrical and fire safety enclosure.

This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2, Installation and Setup, and Chapter 3, Operation.

1To reduce the risk of electric shock, follow all safety notices and never insert conductive metal objects into the circuitry.

2It is important that your touchmonitor remains dry. Do not pour liquid into or onto your touchmonitor. If your touchmonitor becomes wet do not attempt to repair it yourself.

3Your new monitor is equipped with a three-wire, grounding power connector, AMP "Mate-N-Lock", part number 350767-1. Contacts inside the connector are female type, AMP part number 350550-1.

Connector Information

Pin 1	Mains line hot	monitor (brown)
Pin 2	Mains ground	monitor (green)
Pin 3	Mains line neutral	monitor (blue)

B-21