GB

This appliance is not suitable for commercial use nor for use in the open air.

Never leave the appliance unattended while it is in use.

Children cannot recognise the dangers involved in the incorrect use of electrical appliances. Therefore never allow children to use household appliances without supervision.

Always remove the plug from the socket when the appliance is not in use and each time before it is cleaned.

Danger! Nominal voltage is still present in the appliance as long as the appliance is connected to the mains socket.

Switch the appliance off before disconnecting from the mains.

Never use the cord to carry the appliance.

SPECIFIC SAFETY ADVICE

Careful, danger of burning! Bread can burn easily. Therefore, never place the toaster close to or beneath curtains or other flammable materials.

Do not place any oversized bread products or bread that is wrapped in tin or plastic foil into the bread slots (10). This can cause flames or electric shocks.

Put the toasting lever up before pulling the plug.

Danger of burning: Some parts of the device get very hot while in use. Touch only the handles or buttons.

Allow the device to cool down before removing or attaching any parts.

Do not attempt to remove any food from the device while it is on.

Do not use any accessories that are not included with the device!

This device is only intended for toasting bread. Do not heat any other type of food with it.

Under no circumstances should you place bread with cheese or spreads into the bread slots (10).

PRIOR TO FIRST USE

Remove all packaging.

Let the toaster run on the highest level 4 – 5 times without bread. This will remove any manufacturing residues. While doing so, make sure that the area is properly ventilated (such as by opening a window).

OPERATION

Place the bread into the bread slots (10). Each slot (10) should only be used for one slice of bread.

Connect the power plug (1) to a suitable power outlet.

Using the toasting control (5), you can set the desired level of toasting (1 = light toasting, 7 = dark toasting). We recommend that first-time users use a light level

Press the lever (9) all the way down until it automatically clicks in. The control lamp (6) will light up and the toasting process will begin.

The device will automatically switch itself off once the desired level of toasting is reached. The lever (9) will jump up. The bread slices are not toasted.

Attention: The bread slices and some parts of the device are very hot right after the toasting process!

You can also change the desired level of toasting during the toasting process using the toasting control (5).

Toasting frozen bread: Place the bread in the bread slots (10). Set the toasting control to the desired level of toasting. Press down on the on lever (9) and then press the DEFROST key (2). The control lamp

(6) and the blue control lamp (8) light up and the toasting process begins.

Heating up previously toasted bread: Set the toasting control (5) to the desired level of toasting. Place the bread in the bread slots (10) and press down on the lever (9). The toasting process will begin and

then press the REHEAT key (3). The control lamp (6) and the blue control lamp (7) light up and the toasting process begins.

Bagel attachment (11): To warm our toast bagels, use the bagel attachment (11). Attention! Never place bagels directly on the bread slots.

Flip the bagel attachment (11) entirely open and then place it on the bread slots (10) as shown in the illustration. Place the bagels on the bagel attachment (11) and the push the lever (9) all the way down until

it clicks in. The toasting process begins and the control lamp (6) lights up. Once the lever has jumped up again, you can remove the bagels from the bagel attachment.

5

GB

Attention! The bagel attachment gets very hot during use.

Every toasting, defrosting, or warming process can be stopped by pressing the STOP key (4). Note: If the lever (9) does not click in properly, the power supply may be cut.

Check whether the power plug is properly connected to a power outlet.

CARE AND MAINTENANCE

Please also observe the Safety Advice.

First you must wait for the device to cool down.

The casing can be cleaned with a soft, moist cloth and a mild detergent.

Never use abrasive or aggressive detergents or utensils.

TECHNICAL DATA

Operational voltage

:

230V~ 50Hz

Power input

:

850 Watt

INSTRUCTIONS ON ENVIRONMENT PROTECTION

Do not dispose of this product in the usual household garbage at the end of its life cycle; hand it over at a collection point for the recycling of electrical and electronic appliances. The symbol on the product, the instructions for use or the packing will inform about the methods for disposal.

The materials are recyclable as mentioned in its marking. By recycling, material recycling or other forms of re- utilization of old appliances, you are making an important contribution to protect our environment.

Please inquire at the community administration for the authorized disposal location.

GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:

For the purchased device we provide 2 years guarantee, commencing from the day of sale. During this period we will remedy all defects free of charge, which can be demonstrably attributed to material or manufacturing defects, by repair or exchange.

Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non-original parts, are not covered by this guarantee.

elta GmbH Carl-Zeiss-Str. 8 63322 Rödermark

6

Page 4
Image 4
Elta T405 instruction manual Specific Safety Advice, Prior to First USE, Operation, Care and Maintenance, Technical Data

T405 specifications

The Elta T405 is a sophisticated surveillance drone designed to meet the demands of modern aerial reconnaissance and surveillance operations. With a robust set of features, advanced technologies, and exceptional characteristics, the T405 stands as a reliable asset for military, security, and civil applications.

At the core of the Elta T405's capabilities is its exceptional flight system. It boasts a flight endurance of up to 24 hours, allowing for prolonged operations without the need for frequent refueling or re-deployment. This extended flight period is complemented by a range of over 150 kilometers, enabling operators to gather intelligence over vast areas.

One of the standout features of the T405 is its advanced sensor suite. The drone is equipped with high-resolution electro-optical and infrared cameras, which provide real-time video feeds and detailed imagery. These sensors allow for effective day and night surveillance, enabling operators to maintain situational awareness even in challenging weather conditions. The platform also supports other payloads, such as synthetic aperture radar (SAR), which enhances its capabilities in detecting ground movement and changes over time.

The T405’s operational versatility is enhanced by its ability to perform various flight modes, including autonomous, semi-autonomous, and manual controls. This flexibility allows operators to tailor their operational approach according to mission requirements. Furthermore, the drone can be integrated into existing command and control systems, facilitating seamless data sharing and coordination.

In terms of its design, the T405 features a lightweight yet durable airframe constructed with advanced composite materials. This design choice not only contributes to the drone's impressive performance but also enhances its stealth capabilities, reducing its radar cross-section for discreet operations.

The Elta T405 incorporates cutting-edge communication technologies that ensure secure and reliable data transmission. Its advanced encryption methods safeguard sensitive information, while its ability to operate in contested environments allows for continuous connectivity even in the face of electronic warfare tactics.

Safety is paramount in the T405's design, featuring an automated flight safety system that includes fail-safe mechanisms like automatic return-to-home functions in case of communication loss or low battery.

Overall, the Elta T405 is a state-of-the-art drone that embodies the latest advancements in surveillance technology. With its robust features, extensive operational range, and advanced sensor capabilities, it is poised to become an indispensable tool for armed forces, intelligence agencies, and various civil organizations around the globe.