CONNECTION
Audio connections:
Some video components are equipped with special digital audio outputs (e.g. DVD players). If your video component is equipped with a digital audio output, it is recommended that you connect to your unit using a digital cable. Digital audio cables are required to use the DTS and Dolby Digital surround sound modes. If you do not use digital connections, your unit will only operate in Dolby PRO LOGICII, MUSIC, THEATER, HALL and 5 Stereo surround modes. There are two types of digital
White plug to white jack (L: left)
Red plug to red jack (R: right)
Note:
When an optical cable is used, remove the protection caps from the component and your unit before attempting to insert the optical cable. If not using an optical cable or if the cable is removed, always
CD, TAPE jacks
Connect the component with RCA to RCA cords.
Make sure to connect:
White plug to white jack (L: left)
Red plug to red jack (R: right)
DIGITAL IN/OUT terminals
If the CD player or MD player has digital outputs, connect the component with coaxial cables or optical cables.
DIGITAL IN to DIGITAL OUT (CD, etc.)
DIGITAL OUT to DIGITAL IN (MD, etc.)
Connect to any one of the DIGITAL IN terminals. When using DIGITAL OPTICAL IN terminals, remove the caps from the terminals. When you do not use them, leave the caps in place. To record digitally, connect the source (CD player, etc.) to DIGITAL IN and the recorder (MD, etc.) to DIGITAL OUT.
10
