www.emachines.com | Starting the monitor |
6Turn on the speaker bar by rotating the power/volume knob clockwise.
Starting the monitor
Important
The appearance of your monitor may vary from that shown.
Important
When adjusting the monitor settings, always press the Auto button before entering the OSD. This will automatically adjust the monitor image to the ideal settings for the current screen resolution.
To start the monitor:
1Press the power button on the front of monitor. The power LED on the power button turns on.
2Turn on your computer.
After your computer is running, the power LED on the monitor’s power button should be blue. Allow about 10 seconds for the monitor image to appear. If the power LED is not blue or you do not see a monitor image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 21.
3Adjust the tilt of the monitor for the best viewing angle.
4After you see the Windows desktop, press the Auto button on the right side of the monitor to automatically adjust your monitor image to the ideal settings.
5Use the
11