EMC 4K VA 20K VA UPS installation manual For Rack mount model

		Net Weight kg (lb)	50 (110)					86.0 (189.2)		80(176)
		W/O ISOTR
		Shipping Weight kg	53 (116.7)					106.0 (233.2)		101.5(223.3)
		(lb) W/O ISOTR
		Dimensions W x D							257 x 590 x 700	342 x 690 x 715
		x H mm (inch) W/								(13.4" x 27.2" x
									(10.1"x23.2"x27.6")
		ISOTR								28.1")
		Net Weight kg (lb)						123.0 (270.6)		130 (286.0)
		W/ ISOTR
		Shipping Weight kg						145.0 (319.0)		151.5 (333.3)
		(lb) W/ ISOTR
E	nvironment	Operating				0~40°C / 32~104°F
		Temperature
		Storage				-20~50°C / -4~122°F
		Temperature
		Altitude				3,500 meters max
		Audible Noise (1		50 dBA					< 55 dBA
		meter from surface)
		Relative Humidity				0 ~ 95% humidity, non-condensing
C	onformance	Safety				UL 1778, CE
		EMC (EMS / EMI)				IEC 61000-4, FCC Part 15, CISPR 22
		Equipment			Warranty policy may vary depends on region
		Protection Policy
Tower model (with LCD display)				VGD-10000		VGD-12000			VGD-15000	VGD-20000
						12000VA
	Capacity	Capacity (VA)		10000VA					15000VA	20000VA
		Capacity (W)		7000W		8400W			10500W	14000W
Output		Voltage (on battery)		100V, 110V, 115V, 120V / 208V, 220V, 230V, 240V +/-2% (Selectable Output Voltage)
		Frequency (on				50 / 60 Hz +/-0.5%
		battery)
		Transfer Time					0 ms

Physical

Environment

Conformance

Cold Start (DC		YES
start)
Back Up Time		About 4~6 min Full load / 10~15min Half load
(Tower model)
Input Inlet		Hardwire
Receptacles		Hardwire
Dimensions W x D	257 x 690 x 715	342 x 690 x 905	342 x 760 x 905 (13.5" x 29.9" x 35.6")
x H mm (inch) W/O	(10.1" x 27.2" x
		(13.5"x27.2"x35.6")
ISOTR	28.1")
Net Weight kg (lb)	80 (176)	130 (286)		207 (455.4)
W/O ISOTR
Shipping Weight kg	101.5 (223.3)	151.5 (333.3)		225 (495.0)
(lb) W/O ISOTR
Dimensions W x D	342 x 690 x 715	342 x 690 x 905	342 x 760 x 905 (13.5" x 29.9" x 35.6")
x H mm (inch) W/	(13.4" x 27.2" x
		(13.5"x27.2"x35.6")
ISOTR	28.1")
Net Weight kg (lb)	130 (286)	180 (396)		274 (602.8)
W/ ISOTR
Shipping Weight kg	151.5 (333.3)	201.5 (443.3)		292 (642.4)
(lb) W/ ISOTR
Operating		0~40°C / 32~104°F
Temperature
Storage		-20~50°C / -4~122°F
Temperature
Altitude		3,500 meters max
Audible Noise (1		< 55 dB
meter from surface)
Relative Humidity		0 ~ 95% humidity, non-condensing
Safety		UL 1778, CE
EMC (EMS / EMI)		IEC 61000-4, FCC Part 15, CISPR 22
Equipment		Warranty policy may vary depends on region
Protection Policy

Overload Recovery	Auto transfer to UPS
High Efficiency	> 97 %
mode (AC to AC)
UPS Design

For Rack mount model

RM model (with LCD display)

VGD-4000 VGD5000 VGD-6000 VGD-10000

			Technology		On-Line / Fully digitized microprocessor controlled
			Output Wave Form			Sine wave
			Harmonic distortion			< 3% of T.H.D. at linear load
			Crest Factor				3 : 1
	Protection and		Surge Protection			IEC61000-4-5 level 3
Filtering
			Overload Protection	125% for 1 minutes and 150% for 10 seconds (On-line) 130% for 10 seconds and 150%
						for 1.5 seconds (On-battery)
			Short Circuit	UPS output cut off immediately or input fuse / circuit breaker protection
			Protection
S	ystem/Displa	y	Visual Display (LED	UPS on(green), line-mode(green), battery mode(yellow), bypass(yellow), fault(red)
	/Warning		model)
			Visual Display	Input / output voltage, input / output frequency, on-line mode, back up mode, battery
			(LCD model)			capacity, load level
			Audible Alarm			Beep every 5 sec
			(Battery back-up)
			UPS Fault			Continuous beeping sound and LCD display
			Communication			RS-232 Serial Port and USB
Battery			Type			Sealed, maintenance-free lead acid batteries
			DC Voltage (V)	240V / 12V9AH		240V / 12V7.2AH		240V / 12V7.2AH	240V / 12V9AH
			Battery (Tower )	x 20		x 20 x 2SET		x 20 x 2SET	x 20 x 2SET
			Typical Recharge			4 hours
			Time to 90% Full
			Management	Self-test, adjustable battery transfer points and alarm settings
			Battery Protection	Cut off without draining any current when battery is low

Capacity

Output

Protection and Filtering

System/Display

/Warning

Capacity (VA) Capacity (W) Voltage (on battery)

Frequency (on battery)

Transfer Time Overload Recovery

High Efficiency mode (AC to AC)

UPS Design

Technology Output Wave Form Harmonic distortion Crest Factor

Surge Protection

Overload

Protection

Short Circuit

Protection

Visual Display

(LED model)

Visual Display (LCD model)

Audible Alarm (Battery back-up)

UPS Fault

4000VA	5000VA		6000VA	10000VA
2800W	3500W		4200W	7000W
208V, 220V, 230V, 240V +/-2% (Selectable Output Voltage)
	50 / 60 Hz +/-0.5%
		0 ms
	Auto transfer to UPS
> 95 %			> 97 %

On-Line / Fully digitized microprocessor controlled

Sine wave

<3% of T.H.D. at linear load

3 : 1

IEC61000-4-5 level 3

125% for 1 minutes and 150% for 10 seconds (On-line) 130% for 10 seconds and 150%

for 1.5 seconds (On-battery)

UPS output cut off immediately or input fuse / circuit breaker protection

UPS on(green), line-mode(green), battery mode(yellow), bypass(yellow), fault(red)

Input / output voltage, input / output frequency, on-line mode, back up mode, battery

capacity, load level

Beep every 5 sec

Continuous beeping sound and LCD display

30 31