NOTE: Click the Refresh button 
at the top of the navigation window to see any new levels that have been added. The Windows
Refresh button on the browser will log the user off.
passwords:
1.Open the Admin Tools
2.Click InSite Setup > User Manager.
3.Click the Add User button. The User Config- uration page opens.
4.Enter the user information into the fields and click Save. A user has been created and is saved to the database.
5.3.Add A Control System
To add a Control System from the navigation tree:
1.
2.Click Add Control System. The Control System Configuration page opens.
3.Enter the control system information into the fields and click Save. The new control system is visible in the navigation tree. Continue to add other view levels if desired.
Figure
5.3.1.Security Settings
Security settings for InSite are defaulted at the group con- figuration level normally. Under the Optional section on the Control System Configuration page: If the protocol checkbox is enabled here (at the control system level), In- Site will use the protocol information entered at the control system level and bypass the information at the group level for only the units located under this control system.
5.4.Set Up Users (Optional)
It is recommended that a directory structure be set up first, but users with administrator privileges can set up users and
Figure
What Else Can You Do On The User Configu- ration Page? Set the Engineering Units default,
activate GS Screen menus, and enable GS Screens to be set as your home page.
You have now successfully created a navigational tree structure where you can continue adding directories, sites, and other view levels.
InSite Quick Start Guide | Create A Directory Structure • 3 |
