![](/images/new-backgrounds/1164652/16465247x1.webp)
6 Adjust settings
1Press SYSTEM MENU.
2Select a setup page.
3Select an option and then press .
4Select a setting and then press OK / .
•To return to the previous menu, press .
•To exit the menu, press SYSTEM MENU.
•[Off] – Disable the screen saver.
[DIVX (R)VOD]
Display the DivX® registration code.
Tip
•Enter this DivX registration code when you rent or purchase video from http://vod.divx.com/.The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.
English
General setup
On [General Setup Page], you can set the following options:
[TV Display]
TheTV format determines the aspect ratio of display according to the type of TV you have connected.
4:3 Pan Scan (PS) | 4:3 Letter Box (LB) | 16:9 (Wide Screen) |
•[Normal/PS] – For 4:3 screen TV: full- height display with the trimmed sides.
•[Normal/LB] – For 4:3 screen TV:
•[Wide] – For
[OSD Lang]
Select the preferred language for
[Screen Saver]
The screen saver protects the TV screen damage due to prolonged exposure to a static image.
•[On] – Enable the screen saver.
Audio setup
On [Audio Setup Page], you can set the following options:
[SPDIF Setup] > [SPDIF Setup Page] > [Digital Output]
Select audio formats supported by the connected device.
•[Off] – Turn off the digital output.
•[SPDIF/RAW] – If the connected device supports
•[SPDIF/PCM] – If the connected device cannot decode multichannel audio, select this option.
[Dolby Digital Setup] > [Dual Mono] Select audio signals output to speakers.
•[Stereo] – Output multichannel sound signals to both speakers.
•[L - Mono] – Output left mono sound signals to both speakers.
•[R - Mono] – Output right mono sound signals to both speakers.
[3D Processing] >[3D Processing Page] > [Reverb Mode]
Select a virtual surround sound mode. [HDCD] > [HDCD Setup Page] > [Filter] When you play a HDCD (High Defi nition Compatible Digital) disc, select the audio output cutoff frequency.
EN 25