Series 7400 Single Phase 1+N UPS

3.1.1Equipment positioning and environmental considerations

3.1.2Raised Floor Installation

The UPS cabinets can be moved by fork lift or crane. Fork lift apertures are provided in the sides of the base plate and are accessible after removing blanking covers fitted to the side panel ventilation grills. Roof - mounted eye- bolts are fitted to enable the cabinet to be crane-handled. These can be removed once the equipment has been finally positioned.

WARNING

ØEnsure that the UPS weight is within the designated S.W.L. of any handling equipment. See the UPS specification for weight details.

ØDo not move the battery cabinet with the batteries fitted.

The UPS module should be located in a cool, dry, clean-air environment with adequate ventilation to keep the ambient temperature within the specified operating range. If necessary, a system of extractor fans should be installed to aid cooling-air flow, and a suitable air filtration system used where the UPS is to operate in a dirty environment.

Cooling air flow

All the models in the 7400 range are forced-cooled with the aid of internal fans. Cooling air enters the module through ventilation grills located at the bottom of the front, back and side panels (and the door in the case of the 50, 60, 80, 105 & 120 kVA models) and exhausted through grills located in the equipment roof. When the equipment is located on a raised floor, and bottom cable entry is used, additional cooling air also enters the UPS via the floor void.

Clearances

To allow adequate cooling air flow, you should position the equipment with the following space around the back and sides.

o25kVA-40kVA 1 PH Models - 100mm required if the UPS is situated on a solid floor. No space required if situated on a

raised floor.

o50kVA-125kVA 1 PH Models - 100mm required in all cases.

The UPS modules do not require back-access for maintenance servicing; but, where space permits, a clearance of approximately 4 feet (1.2 meters) will ease access to some component parts. Clearance around the front of the equipment should be sufficient to enable free passage of personnel with the door fully opened.

If the equipment is to be located on a raised floor it should be mounted on a pedestal suitably designed to accept the equipment point loading. The installation diagrams in the back of this manual identifies the location of the holes in the base plate through which the equipment can be bolted to the floor.

22

Page 30 Page 32
Page 31
Image 31
Emerson 7400 user manual Cooling air flow, Clearances
Page 30 Page 32

7400 specifications

The Emerson 7400 is a state-of-the-art control system designed for industrial applications, offering enhanced performance and reliability in process automation. This robust device is a part of Emerson's larger DeltaV system, known for its scalability and flexibility in various operational environments.

One of the main features of the Emerson 7400 is its advanced control capabilities, which enable precise management of complex industrial processes. The system is built to support a wide range of control strategies, including PID control, advanced control algorithms, and model predictive control, allowing for optimized performance tailored to specific operational requirements. This versatility makes it suitable for industries such as oil and gas, chemical processing, pharmaceuticals, and more.

The Emerson 7400 utilizes cutting-edge technologies to ensure seamless integration and communication with other components within a facility. Its open architecture supports a wide array of field devices, enhancing the interoperability of the entire control system. The integration of Ethernet-based communication protocols is another notable characteristic, facilitating high-speed data transfer and real-time monitoring, streamlining operations, and improving decision-making processes.

With a focus on safety and reliability, the Emerson 7400 is designed with built-in redundancy features. These include dual power supplies and network interfaces, ensuring continuous operation even in the event of component failure. This redundancy is crucial for industries where downtime could result in substantial financial losses or safety hazards.

The user interface of the Emerson 7400 is another highlight, combining intuitive design with powerful analytics capabilities. The system offers advanced visualization tools and customizable dashboards, providing operators with critical insights into process performance and enabling proactive management of potential issues.

Furthermore, the Emerson 7400 supports industry 4.0 initiatives through data analytics and cloud integration. This allows for predictive maintenance, improving equipment longevity and reducing operational costs. The system’s data collection and analysis capabilities empower organizations to leverage big data for enhanced productivity and efficiency.

In summary, the Emerson 7400 is a sophisticated control system that brings together advanced technologies, robust features, and a commitment to operational excellence. Its reliability, adaptability, and integration capabilities position it as a leading choice for industries seeking to enhance their automation processes while ensuring safety and efficiency.
Top Page Image Contents