Series 7400 Single Phase 1+N UPS

4.4Remote Alarm Monitor (RAM) for Single Module & “1 + 1” UPS System.

This will contain following items:

1.Remote Alarm Monitor for Single Module #270154000001.

2.Remote Alarm Monitor for 1+1 Module #270154000003.

This unit is always used in conjunction with Alarm interface PCB #100215120002, only. Remote Alarm Monitor enables the auxiliary alarm signals to be displayed at a remote station upto 200 meters from the main equipment.

The RAM is required to be mounted vertically. This is ideally suitable for wall mounting. However, this also can be mounted inside a panel. The cut out dimensions for the panel mounting, are as shown in the clamps provided for wall mounting are required to be removed. (Refer drawing).

There are total 9 alarms provided on the RAM. Each of the alarm initiates an audible alarm warning. This is, however, subject to a short time delay to prevent the warning being activated by transient conditions. Pressing the reset push button cancels the audible warning but the alarm indications remain until the condition is rectified. A test push button is also provided to ensure that all the LED’s are healthy.

Power Supply

The RAM contains a single-phase 230V a.c. mains driven power supply. Power is applied through a standard two-pin mains connector located at the backside of the RAM. This 2 pin male-

female type connector is marked as N L . The supply is rated to approximately 10 watts and hence can be tapped from any suitable source. This generates required DC power supply for functional requirement of the RAM. Once AC power is available to RAM, “POWER” indicating LED on RAM starts glowing. This indicates that RAM is ready for operation. This power supply is used to reproduce UPS mimic and display alarms.

Mimic and Alarm Connections

Refer figure 25 and 26.

For connection of RAM signals to interface PCB two different connectors are provided marked as RM-1 and RM-2. RM-1 is a six pin male-female connector and RM-2 is a 10 pin male-female connector. Both the connectors are with screwed terminals. The connection diagram of both the terminals with interface PCB is as shown in connection diagram. 24V d.c.supply is available on RM-3. This is required to be connected to M3: pin3 of Interface PCB. This 24 volts supply is required to be looped on interface PCB as shown with star marked connections. For connecting RAM and interface PCB’s, use multicore 1.5sq.mm. stranded conductor, flexible copper cable. RAM actually requires 16 such cores. However, it is advisable to provide spare cores and hence we recommend use of 24-core cable.

For connection diagram of 1+1 UPS system refer figure 27.

42

Page 51
Image 51
Emerson 7400 user manual Power Supply, Mimic and Alarm Connections

7400 specifications

The Emerson 7400 is a state-of-the-art control system designed for industrial applications, offering enhanced performance and reliability in process automation. This robust device is a part of Emerson's larger DeltaV system, known for its scalability and flexibility in various operational environments.

One of the main features of the Emerson 7400 is its advanced control capabilities, which enable precise management of complex industrial processes. The system is built to support a wide range of control strategies, including PID control, advanced control algorithms, and model predictive control, allowing for optimized performance tailored to specific operational requirements. This versatility makes it suitable for industries such as oil and gas, chemical processing, pharmaceuticals, and more.

The Emerson 7400 utilizes cutting-edge technologies to ensure seamless integration and communication with other components within a facility. Its open architecture supports a wide array of field devices, enhancing the interoperability of the entire control system. The integration of Ethernet-based communication protocols is another notable characteristic, facilitating high-speed data transfer and real-time monitoring, streamlining operations, and improving decision-making processes.

With a focus on safety and reliability, the Emerson 7400 is designed with built-in redundancy features. These include dual power supplies and network interfaces, ensuring continuous operation even in the event of component failure. This redundancy is crucial for industries where downtime could result in substantial financial losses or safety hazards.

The user interface of the Emerson 7400 is another highlight, combining intuitive design with powerful analytics capabilities. The system offers advanced visualization tools and customizable dashboards, providing operators with critical insights into process performance and enabling proactive management of potential issues.

Furthermore, the Emerson 7400 supports industry 4.0 initiatives through data analytics and cloud integration. This allows for predictive maintenance, improving equipment longevity and reducing operational costs. The system’s data collection and analysis capabilities empower organizations to leverage big data for enhanced productivity and efficiency.

In summary, the Emerson 7400 is a sophisticated control system that brings together advanced technologies, robust features, and a commitment to operational excellence. Its reliability, adaptability, and integration capabilities position it as a leading choice for industries seeking to enhance their automation processes while ensuring safety and efficiency.