Presetting Radio Stations
You can preset up to 30 of your favorite AM and FM stations, in any combination, in the tuner memory for easy recall.
1.Press the STANDBY button on the front panel or on the remote control to turn the system ‘On’.
2.Press either the TUNER button on the front panel or the FUNCTION button on the remote control to select the Tuner function. Press again to switch between AM and FM bands if necessary.
3.Tune to the first station you wish to preset by either the Manual or Automatic tuning method as follows:
ŸManual Tuning - repeatedly press the TUNING 5 or 6 buttons on the front panel or the remote control until the desired frequency appears on the display. (Note: You must use manual tuning if your are trying to tune to a weak station.)
ŸAutomatic Tuning - press and hold the TUNING 5 or 6 button on the front panel or the remote control until the display begins to scan down or up, and then release the buttons. The Tuner will stop on the first strong station it finds. Repeat this process until it stops on your desired station.
4.When the desired station appears on the display (example: FM 103.50 MHZ) press the MEMORY button on the front panel. (Note: There is no MEMORY button on the remote control.) The PRESET indicator and channel “01” indicators will flash in the display for 5 seconds.
When the indicators stop flashing, the station is memorized in Preset Memory number 1.
5.Repeat step 3 to tune to the next station to be memorized. Press the MEMORY button on the front panel and while the PRESET and channel “01” indicators are flashing press the PRESET TUNING 5 or 6 buttons to select preset channel memory number “02” or any other preset number from 02 to 30. When the indicators stop flashing the station is memorized.
6.Repeat step 5 until you have stored up to 30 stations in the tuner memory.
Recalling Preset Stations
1.Turn the system ‘On’ and select the Tuner function.
2.Press the PRESET STATION 5 or 6 buttons on the front panel or remote to scroll through all of the preset station memories to find your desired station.
You may also use the number keys on the remote control to go directly to any of the preset stations. To select preset stations 1 through 9, press the corresponding number button. To select stations from 10 to 30, press the corresponding two number buttons.
Changing Preset Stations
Tune to the new station you want to memorize. Press the MEMORY button on the front panel. While the PRESET and “01 CH” indicators are flashing, press the PRESET MEMORY 5 or 6 buttons to select the memory number you wish to change. When the indicators stop flashing the new station is now memorized and the previous station is deleted.
Last Station Memory
The Tuner always remembers the last station that you were listening to before you switched to a different function or shut the power ‘Off’. It will return to that same station when you turn the system ‘On’ again and select the Tuner function.
Note: If the AC power is disconnected for an extended period of time all of the stations in the tuner memory may be deleted. You will have to store them in memory again when power is restored.
22
