Emerson CF244CRM00, CF244WW00, CF244BS00, CF244ORB00 Lift the ceiling cover up to the threaded

BP7408 44" & 52" Curva 1/12/10 8:52 AM Page 10

HANGER BRACKET

HANGER BRACKET GROUND WIRE (GREEN)

HANGER BALL GROUND WIRE (GREEN)

OUTLET BOX

BLACK SUPPLY WIRE

BLACK FAN WIRE

BLACK/WHITE RECEIVER WIRE

BLUE FAN WIRE

BLUE RECEIVER

WIRE

		OPEN
		PORTION OF
SUPPLY GROUND		RECEIVER
		HERE
WIRE (GREEN OR
BARE)
RECEIVER
WHITE SUPPLY			BLACK RECEIVER WIRE
WIRE			WHITE RECEIVER WIRE
	CEILING COVER		WHITE FAN WIRE
Figure 12
		WIRE CONNECTOR
	RECEIVER		5. Lift the ceiling cover up to the threaded
			studs and turn until the studs protrude
			through the holes in the ceiling cover
	BLACK SUPPLY		(Figure 14).
WHITE	WIRE		6. Secure the ceiling cover in place by
RECEIVER		WHITE
WIRE			sliding lockwashers (supplied) over the
		SUPPLY
BLACK RECEIVER		WIRE	threaded studs and installing the two
WIRE			knurled knobs (supplied). (Figure 14).
BLACK/WHITE		BLUE RECEIVER
RECEIVER WIRE			Tighten the knurled knobs securely
		WIRE	until the ceiling cover fits snugly against
WHITE FAN WIRE		BLUE FAN WIRE
			the ceiling.

BLACK FAN WIRE

Figure 13

3. After connections have been made, turn leads upward and carefully push leads into the outlet box, with the white and green leads on one side of the outlet box and the black and blue leads on the other inside of the outlet box.

4. Screw the two 1-1/4” threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 11).

1-1/4"
THREADED
STUD (2)
#8 EXTERNAL	CEILING
TOOTH	COVER
LOCKWASHER (2)	#8-32 KNURLED
	KNOB (2)

Figure 14

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

10 UL Model No.: CF244 & CF252