BP7408 44" & 52" Curva 1/12/10 8:52 AM Page 11
How to Assemble Your Light Kit Glass Shade
1. Screw in two
LIGHT KIT PLATE
SOCKETS (2)
Figure 15
How to Assemble Your No Light Cover Plate
!
WARNING
Do not install any light bulbs into the light kit plate if using the cover plate. Installation of light bulbs when using the cover plate could result in fire, shock and serious personal injury.
1. Place the cover plate onto the lower housing aligning the three flat areas on the top flange of the cover plate with the three pins on the inside of the fan motor housing assembly (Figure 17). Then turn the cover plate clockwise until it stops turning.
2. Your cover plate is now installed
2. Place the glass shade into the opening in the fan motor housing assembly, aligning the three flat areas on the top edge of the glass with the three raised dimples on the fan motor housing assembly and turn the glass shade clockwise until it stops (Figure 16).
NOTE: periodically check that the glass shade is seated fully clockwise in the fan motor housing assembly.
FLAT AREA (3) | DIMPLES (3) |
|
GLASS
BOWL
Figure 16
DO NOT INSTALL LIGHT BULBS
WHEN USING THE COVER PLATE
FLAT AREA (3) | DIMPLES (3) |
|
COVER
PLATE
Figure 17
11 | UL Model No.: CF244 & CF252 |
