BP7408 44" & 52" Curva 1/12/10 8:52 AM Page 13
Setting Operating
Frequency of
Remote Control
Your remote control has code switches which must be set in one of 32 possible code combinations (Figure 18). The five levers (numbered 1, 2, 3, 4, and 5) on the switches are
1. Slide the five switch levers in the remote control to your choice of ON (up) or down positions. Use a
2. When power is restored, push and hold the fan OFF button ( 
) for 3 to 5 seconds to set the code in the receiver.
3. If airflow is desired in the opposite direction, press the (
) button on the
remote control. The fan must be Figure 20 operating at any speed for the reverse
button to function. The blades will turn in the opposite direction and reverse the airflow.
4. To set the desired fan speed, press the (
) button to decrease the speed and the ( 
) to increase the speed. The LED display will light up to indicate the new speed selected.
5. To turn the downlight on, press and release the ( 
) button. The light will turn on at the light intensity previously selected.
6. To vary the intensity of the light, hold the ( 
) button down until the desired light intensity is reached, then release the button.
7. The sixth switch marked ON and I is for dimming control of lights: Set switch to ON to allow for dimming of the lights. Set switch to I for no dimming of the lights such as for fluorescent bulbs.
13 | UL Model No.: CF244 & CF252 |
