This Manual Is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One stepladder

One wire stripper

One Phillips head screwdriver

Four 15-watt (max.) candelabra base bulbs

MATERIALS

Wiring outlet box and box connectors must be of type required by the local code. The minimum wire would be a 3-conductor (2-wire with ground) of the wire size, to right:

Installed Wire Length

Wire Size A.W.G.

Up to 50 ft.

14

50-100 ft.

12

WARNING

If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted.

WARNING

Do not install or use fan if any part is damaged or missing. Call Toll-Free:

1-800-654-3545

WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.

1.Open styrofoam unit containing fan. Remove upper and center sections of styrofoam unit. Remove parts and check to see that you have received the following:

a.One Fan Motor and Housing Assembly

b.One Motor Coupling Cover

c.One Ceiling Cover

d.Five Fan Blades

e.Five Flanges

f.Five Flange Medallions

g.One Hanger Ball/12” Downrod Assembly

h.One Hanger Bracket

i.One 6” Downrod

j.One Light Kit Assembly

k.One Light Kit Glass

l.One Switch Housing

m.One Decorative Downrod Cover

n.Four Decorative Scrolls

o.One Scroll Collar

p.One SW116 Fan/Light Wall Control (transmitter) Includes Three Covers

q.One SW105 Receiver

r.One Loose Parts Bag Containing:

1.One 5/16-18 x 1/4” setscrew

2.One 5/32" hex wrench

3.Four 8-32 x 1-1/4” threaded studs

4.Four #8-32 knurled knobs

5.Four #8 external tooth lockwashers

6.Five 12 Ga. wire connectors

7.One hairpin clip

8.One clevis pin

9.Twenty-one 10-32 x 10mm pan head screws

10.Eleven #8-32 x 14mm oval head screws

11.Four #8-32 x 10mm flat head screws

12.Five #8-32 x 15mm flat head screws

13.One balancing kit

NOTE: Place the parts from the loose parts bags in small containers to keep them from being lost. If any parts are missing, contact your local retailer or catalog outlet for replacement before proceeding.

 

 

 

 

a.

 

 

 

 

 

10-32 x 10mm PAN HEAD SCREW

 

 

 

 

(4 Per Blade)

 

 

 

 

10-32 x 10mm PAN HEAD SCREW

 

 

 

 

(4 Per Blade)

 

 

 

 

10-32 x 10mm PAN HEAD SCREW

 

 

b.

 

(4 Per Blade)

 

 

 

10-32 x 10mm PAN HEAD SCREW

 

 

 

(4 Per Blad )

FLANGE

 

 

c.

10-32 x 10mmePAN. HEADBLADESCREW ASSEMBLY

 

 

 

(4 Per Blade)

FLANGE

 

 

 

 

 

ASSEMBLY

 

 

 

 

 

BLADE

 

 

 

 

 

FLANGE

 

 

 

 

 

FLANGE

 

 

 

 

 

ASSEMBLY

 

 

 

 

 

BLADE MEDALLION

 

 

 

 

 

FLANGE

 

 

 

 

 

FLANGE

 

 

 

d.

 

ASSEMBLY

 

 

 

 

MEDALLION

 

 

 

BLADEFLANGE

 

 

 

BLADE

FLANGEASSEMBLY

 

 

 

MEDALLION

 

 

 

 

FLANGE

 

 

 

 

MEDALLION

 

 

 

 

FLANGE

 

 

 

 

MEDALLION

 

 

 

 

 

f.

 

h.

 

 

 

 

 

 

 

i.

 

 

 

 

 

 

j.

 

 

 

g.

 

 

 

 

 

 

 

m.

 

 

 

k.

l.

 

 

 

n.

 

 

 

 

o.

 

p.

q.

r.

 

 

 

3

 

 

U.L. Model No.: CF3200

Page 3
Image 3
Emerson CF3200AWL00 owner manual Unpacking Instructions, Tools Needed for Assembly