28.The blue, black, white, and yellow leads exiting the downrod are
29.You have now completed the initial assembly of your new ceiling fan. You can now proceed with hanging and wiring your fan.
Installation of the
Decorative Scroll Assembly
NOTE: The following procedures are to be performed only if you have installed the 12” or longer downrod.
1.Slide the decorative downrod cover over the 12” downrod to rest upon the motor coupling cover (Figure 17).
12" DOWNROD OR LONGER
3.Slide the assembled decorative scroll over the 12” downrod and position each scroll leg on the decorative light kit ring (Figure 19). Secure each of the four decorative scroll legs using four
ASSEMBLED
DECORATIVE SCROLL
HEAD SCREW (1 per
leg)DECORATIVE LIGHT KIT RING
Figure 19
4.You have now completed the installation of the decorative scroll assembly. Proceed to Page 7, Step 27 to complete your ceiling fan installation.
DECORATIVE
DOWNROD
COVER
MOTOR
COUPLING
COVER
Figure 17
2.Remove the four screws in the scroll collar and save for the following procedure. Assemble the decorative scroll assembly to the scroll collar using the previously removed screw (Figure 18). Assemble the remaining three decorative scroll assemblies in the same manner.
SCROLL COLLAR
SCROLL COLLAR SCREWS (4)
DECORATIVE SCROLL
ASSEMBLY (4)
Figure 18
How to Hang
Your Ceiling Fan
WARNING
The fan must be hung with at least 7' of clearance from floor to blades (Figure 20). Do NOT hang this fan on an 8’ ceiling when using the 12” downrod.
CEILING
AT LEAST
7'
FLOOR
Figure 20
WARNING
The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support”.
1.Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box. (Figure 21.)
8 | U.L. Model No.: CF3200 |
