BP7305 Westfield 6/30/06 12:10 AM Page 12
LISTED OUTLET BOX | BLACK FAN WIRE | |
GREEN WIRE |
| |
| BLACK | |
(GROUND) |
|
|
FROM |
|
|
HANGER |
|
|
BRACKET |
| WHITE |
|
| |
GROUND |
|
|
WIRE |
|
|
|
| BLUE |
| GREEN WIRE (GROUND) | |
| FROM HANGER BALL | |
| LISTED WIRE CONNECTOR (3) | |
Figure 15 |
|
|
GENERAL PURPOSE ON/OFF
WALL SWITCH OR OPTIONAL
EMERSON FAN CONTROL BLACK (HOT)
TO 120
VOLT
WHT. SUPPLY
GROUND GROUND
4. Screw the two
5. Lift the ceiling cover up to the threaded studs and turn until the studs protrude through the holes in the ceiling cover (Figure 16).
6. Secure the ceiling cover in place by sliding lockwashers (supplied) over the threaded studs and installing the two knurled knobs (supplied) (Figure 16). Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling.
!WARNING
To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.
7.Your ceiling fan is now installed, wired and ready for use.
CEILING COVER
LOCKWASHER
(2)
KNURLED
KNOB (2)
Figure 16
THREADED STUD (2)
12