Emerson CF701WW00 Install, Operate and Maintain Your Ceiling Fan, Unpacking Instructions

This Manual Is Designed to Make it as Easy as Possible for You to Assemble,

Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver	One stepladder
One 1/4” blade screwdriver	One wire stripper

MATERIALS

Wiring outlet box and box connectors must be of type required by the local code. The minimum wire shall be

a3-conductor (2-wire with ground) of the following size:

Installed Wire Length	Wire Size A.W.G.
Up to 50 ft.	14
50-100 ft.	12

!WARNING

Before assembling your ceiling fan, refer to section on proper method of wiring your fan (page 7). If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted.

!WARNING

Do not install or use fan if any part is damaged or missing. Call Toll-Free:

1-800-654-3545

!WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Company. Substitution of parts or accessories not designated for use with this product by Emerson Electric Company could result in personal injury or property damage.

1.Check to see that you have received the following parts:

9.One hairpin clip

10.Eleven M6 x 12mm flange head screws with lockwashers

NOTE: Place the parts from the loose parts bags in a small container to keep them from being lost. If any parts are missing, contact your local retailer or catalog outlet for replacement before proceeding.

2.Remove the fan housing assembly from the protective plastic bag. Turn the upper styrofoam pad over and carefully place the fan motor assembly into the recess in the pad with the top of the motor facing up.

A

NOTE: If you are uncertain of part description, refer to exploded view illustration.

a. Fan motor assembly

b. Five fan blades

c. One ceiling cover

d. Five blade flanges

e. One hanger ball/downrod assembly

B

D

C

f. One hanger bracket

g. One switch housing assembly

h. Two 60-watt candelabra bulbs

i. One light fitter

i. One glass bowl

k.One loose parts bag containing:

1.Sixteen M5 x 6mm washer head blade screws

2.Two threaded studs, #8-32 x 1-1/4”

3.Two lockwashers, #8-32

4.Two knurled knobs, #8-32

5.Two wood pendants

6.Two couplings

7.Three wire connectors

8. One clevis pin 3

F

E

K

GH

J

I

U.L. Model No.: CF701