9.Remove the center plug screw from the switch housing assembly (Figure 4). Remove and retain the two wire connectors.
SWITCH CUP CONNECTOR
SCREWS
SWITCH
CUP
CENTER PLUG
SCREW
Figure 4
10.Remove and retain the lockwasher and nut from the light fitter. Insert the black and white wires from the light fitter through the center hole in the switch housing assembly. Thread the switch housing assembly onto the light fitter. Reinstall the lockwasher and nut and tighten securely (Figure 5).
11.Connect the white wire from the ceiling fan to the white wire of the light fitter. Connect the blue wire from the ceiling fan to the black wire of the light fitter. Use wire connectors (previously removed) to make connections (Figure 5).
12.Engage the connector of the switch housing assembly with the motor connector (Figure 6). The two connectors are keyed and
13.Carefully tuck all wires and splices into the switch housing.
SWITCH
HOUSING
ASSEMBLY
SWITCH HOUSING
CONNECTOR
MOTOR CONNECTOR
SWITCH HOUSING
MOUNTING SCREW
Figure 6
14. Remove the three switch housing mounting |
screws (Figure 7) from the switch housing plate. |
Position the switch housing assembly on the |
BLUE WIRE 
BLACK WIRE
SCREWS 
NUT
SPRING
LOCKWASHER
SWITCH
HOUSING
ASSEMBLY
BOWL
CAP
Figure 5
SWITCH CUP
CONNECTOR
WIRE
CONNECTORS
WHITE WIRES
FAN
SWITCH
CHAIN
LIGHT
FITTER
switch housing plate and align the holes in the |
switch housing assembly with the holes in the |
plate. Secure the switch housing assembly by |
installing the three mounting screws (Figure 7). |
!WARNING
Do not pinch wires between the switch housing assembly and the switch housing plate.
LIGHT FITTER
SWITCH HOUSING
ASSEMBLY
MOUNTING
SCREWS (3)
Figure 7
5
U.L. Model No.: CF701
