IMPORTANT

Your ceiling fan is designed to be installed either in the standard manner, or in the close-to-the-ceiling manner. Using the standard method, the hanger ball/downrod assembly will suspend the fan several inches below the ceiling cover. Using the close-to-the-ceiling method, the ceiling cover installs directly on the fan motor housing, thus mounting the fan 3-1/2 inches closer to the ceiling than the standard method. In no case should the fan blades be lower than seven feet above the floor. Depending on your desired mounting method, proceed to

“INSTALLING HANGER BALL/DOWNROD ASSEMBLY” for standard mounting, or to

“INSTALLING CEILING COVER ON FAN MOTOR HOUSING” for close-to-the-ceiling mounting.

Removal Of The

Hanger Bracket

1.Loosen the two screws in the keyholes slots of the ceiling cover. Remove and retain the other two screws and lockwashers (Figure 1).

2.Turn the ceiling cover and remove the hanger bracket.

HANGER

BRACKET CEILING

COVER

Installing The Hanger Ball/Downrod Assembly

(For Standard Mounting)

1.Pass the 42" motor leads through the opening in the ceiling cover. Be sure the cover is oriented correctly.

2.Separate, untwist and unkink the three motor leads. Route the motor leads through the hanger ball/downrod assembly.

3.Loosen the two setscrews in the motor coupling. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 2). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull on the hanger ball to make sure the clevis pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrews securely tightened. Failure to verify that the pin and setscrews are properly installed could result in the fan falling.

4.While pulling up on the hanger ball, securely tighten the two setscrews in the motor coupling (Figure 2).

NOTE: The setscrews must be properly installed as described above, or fan wobble could result.

5.The fan comes with blue, black and white leads that are 42” long. Measure up approximately 6 to 9-inches above top of hanger ball/downrod assembly. Cut off excess leads and strip back insulation 1/2-inch from end of leads.

REMOVE AND RETAIN

TWO SCREWS AND LOCKWASHERS LOOSEN THE TWO SCREWS IN THE KEYHOLE SLOTS

Figure 1

DECORATIVE

CAP

HAIRPIN

CLIP

MOTOR COUPLING

HANGER BALL/DOWNROD ASSEMBLY

CEILING

COVER

SETSCREW

CLEVIS

PIN

SETSCREW

Figure 2

4

Page 3 Page 5
Page 4
Image 4
Emerson CF712ORB01, CF712WW01 Removal Hanger Bracket, Installing The Hanger Ball/Downrod Assembly, For Standard Mounting
Page 3 Page 5

CF712TZ01, CF712OB01, CF712WW01, CF712ORB01, CF712AW01 specifications

The Emerson CF712AB01, CF712WB01, CF712BS01, CF712AW01, and CF712ORB01 are a series of stylish ceiling fans designed to enhance the aesthetic and comfort of any living space. Each model is equipped with key features and modern technologies that set them apart in the market.

One of the standout features of the Emerson CF712 series is its sleek design that effortlessly blends into various interior styles. Whether it's the Antique Brass finish of the CF712AB01, the White finish of the CF712WB01, the Brushed Steel of the CF712BS01, the Aged Walnut of the CF712AW01, or the Oil-Rubbed Bronze of the CF712ORB01, each fan adds a touch of elegance to any room. The color options cater to different design preferences, allowing homeowners to find the perfect match for their decor.

In addition to their aesthetic appeal, the fans in this series are designed for optimal functionality and energy efficiency. The blade pitch and motor design work together to produce a powerful airflow, ensuring that any room feels comfortable regardless of the season. The fans are fitted with reversible motors, enabling users to switch the direction of the blades with ease. This feature allows for a cooling breeze in the summer and a gentle updraft in the winter, aiding in the circulation of warm air.

Installation and maintenance of the CF712 ceiling fans are simplified through innovative engineering. Many models come with a Quick Connect system for more effortless assembly. The blades are crafted from high-quality materials that are not only durable but also easy to clean, ensuring longevity and reduced maintenance effort.

Moreover, these fans are often compatible with various control options, including pull chains and remote controls, giving users the flexibility to operate them from anywhere in the room. Some models also support smart home technology, allowing integration with platforms like Alexa and Google Assistant for voice-activated control.

The Emerson CF712 series caters to sustainability-conscious consumers as well. By consuming less electricity than traditional fans while still delivering high performance, these fans help reduce energy costs and environmental impact.

Overall, the Emerson CF712AB01, CF712WB01, CF712BS01, CF712AW01, and CF712ORB01 ceiling fans combine elegant design, advanced technology, and energy-efficient operation, making them an excellent choice for enhancing both style and comfort in any home.
Top Page Image Contents