Emerson CF955WW 00, CF955BS 00, CF955ORB 00 owner manual Unpacking Instructions

This Manual Is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One Phillips head screwdriver	One stepladder
One 1/4” blade screwdriver	One wire stripper
Three wire connectors (supplied)
One 3/16” hex wrench (supplied)

MATERIALS

Wiring outlet box and box connectors must be of type required by the local code. The minimum wire would be a 3-conductor (2-wire with ground) of the following size:

Installed Wire Length	Wire Size A.W.G.
Up to 50 ft.	14
50-100 ft.	12

! WARNING

Before assembly your ceiling fan, refer to section on proper method of wiring your fan (page 6). If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted.

! WARNING

Do not install or use fan if any part is damaged or missing. Call Toll-Free:

1-800-654-3545

! WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.

2.Remove the fan assembly from the protective plastic bag. Place the fan assembly into the upper foam pad with the top of the motor facing up.

The upper foam pad serves as a holder for the fan during the first stages of assembly.

COUPLER	HANGER
COVER
	BRACKET

FAN

ASSEMBLY

HANGER BALL/

DOWNROD

ASSEMBLY

1.Check to see that you have received the following parts:

NOTE: If you are uncertain of part description, refer to exploded view illustration.

GLASS BOWL

CEILING COVER

a. Fan motor assembly

b. One lower housing assembly

c. One ceiling cover

13W GU-24

LOOSE PARTS

d. Five fan blades

FLOURESCENT

e.	One hanger ball/downrod assembly
f.	One hanger bracket

LAMPS

BAG

g. One glass globe
h. One fan/light control
i. One coupler cover
j. Four 13-watt GU-24 fluorescent lamps
k. One loose parts bag containing:
1.	Sixteen 3/16-24 x 1/2” slotted Phillips
	washer head blade screws
2.	Three wire connectors
3.	Two 1-1/4" threaded studs
4.	Two lockwashers
5.	Two knurled knobs
6.	One clevis pin
7.	One hairpin clip

LOWER
HOUSING			FAN/LIGHT
ASSEMBLY	2	5
	3	4
	1	6	CONTROL

FAN BLADES

NOTE: Place the parts from the loose parts bags in a small container to keep them from being lost. If any parts are missing, contact your local retailer or catalog outlet for replacement before

proceeding. 3 U.L. Model No.: CF955